<

Duratex 8oz Mesh Banner with Liner

Duratex Mesh Banner with backer is a lightweight mesh material for windy areas. The mesh weave minimizes wind resistance and allows air to pass through the material. Product comes wound with a special backing material that is removed after printing.

Buy Now at Grimco:
Proud to offer a variety of sizes. To order material over 72 inches, please call 800.542.9941.
 

Features + Benefits

  • Polyester Scrim/Outdoor Strength
  • Quick Drying/Abrasion Resistance
  • Water Resistant/Anti-Smudge
  • Easy Finish/Grommet, Sewed & Hem Stitch Capable
  • Outdoor Durability/Lamination Not Required
 

Applications

  • Indoor Signage
  • Outdoor Signage
  • Building Signs
  • Trade Show Displays
  • Front-lit Signage
  • Outdoor Displays
Product Information
Size  
30" x 131 ft' 80"” x 131 ft'
54" x 131 ft' 126" x 131 ft'
63" x 131 ft'  
Physical Properties
Caliper:
16 mil
Weight:
8oz/sq yd
Denier:
500 x 1000
Air Floating Rate:
3:7
 
Installing

This product can be grommeted for short-term indoor banner applications. Metal grommets should be inserted to penetrate 2-4 layers of materials for increased strength and durability. Standard high tack banner tape can be used for added strength and reinforcement. Sewing the material can scratch or pick off coating. If sewing is desired, it is recommended that the material be double stitched hem side up with a maximum of five stitches per inch. Half moon wind slits are recommended for banners that are 10 ft. or larger. Corner reinforcements, professional installer and proper installation tools are strongly recommended.

Storage & Handling

To maintain a shelf life of 1 year, store material at a temperature of 72° F with relative humidity of 50%. Allow material to stabilize to room/printing conditions for 24 hours prior to use.

Printer Compatibility

Compatible with most Solvent, Eco-Solvent, Latex and UV curable inkjet printers.